حسگر مغناطیسی
IC-MHL200
12Bit Linear/Rotary Position Hall Encoder - pole width 2.00 mm
کیفیت: ORIGINAL(distributor) پکیج: TSSOP-20
قیمت تک فروشی 13,024,700 ریال
قیمت عمده 12,405,900 ریال (10 به بالا)
قیمت ویژه 12,158,380 ریال (100 به بالا)
قیمت فوق العاده12,034,620 ریال (1000 به بالا)
 قیمت تک فروشی 15.235 تتر با تخفیف
71.46866.6465.96
|
توضیحات
iC-MHL200 يک سنسور موقعيت مغناطيسي با سنسورهاي هال يکپارچه براي اسکن نوارهاي مغناطيسي و چرخهاي قطب با گام قطب 2 ميليمتر است. سرعت حرکت تا 8 متر بر ثانيه را مي توان حتي در بالاترين وضوح 0.98 ميکرومتر دنبال کرد. واحد تهويه سيگنال ولتاژهاي سينوسي و کسينوس با دامنه ثابت توليد مي کند که براي رديابي لحظه اي تبديل زاويه سينوسي به ديجيتال استفاده مي شود. وضوح را مي توان تا حداکثر 4 096 افزايش در يک دوره مغناطيسي 4 ميلي متر برنامه ريزي کرد. رابط يکپارچه BiSS عملکرد زنجيرهاي از چندين دستگاه را با ثبت موقعيت همزمان در همه حسگرهاي شبکه امکانپذير ميسازد. همچنين مي توان به حافظه دستگاه از طريق پروتکل BiSS C دو طرفه بدون تداخل در چرخه هاي خواندن دسترسي داشت. رابط افزايشي با پينهاي A، B و Z سيگنالهاي ربع رمزگذار را با نرخ لبه تا 8 مگاهرتز تامين ميکند. سيگنالهاي افزايشي مکمل در خروجيهاي U، V، W در دسترس هستند. موقعيت شاخص در خروجي Z قابل تنظيم است و از طريق ورودي فعال ENZ قابل تنظيم است. يک تبديل اضافي
Description
The iC-MHL200 is a magnetic position sensor with integrated Hall sensors for the scanning of magnetic tapes and pole wheels featuring a pole pitch of 2 mm. Moving speeds of up to 8 m/s can be followed even at highest resolution representing 0.98 micro m. The signal conditioning unit generates constant-amplitude sine and cosine voltages that are used for real-time tracking sine-to-digital angle conversion. The resolution can be programmed up to a maximum of 4 096 increments within one magnetic period of 4 mm. The integrated BiSS interface enables daisy-chain operation of multiple devices with a synchronous position capture at all networked sensors. The device s memory can also be accessed via the bidirectional BiSS C protocol without interfering the readout cycles. The incremental interface with the pins A, B and Z supplies encoder quadrature signals at an edge rate of up to 8 MHz. Complementary incremental signals are available at the U, V, W outputs. The index position at the Z output is adjustable and can be gated via enable input ENZ. An additional convert
|
کلیه حقوق این سایت متعلق به فروشگاه Skytech می باشد