تنظیم کننده LDO
LD1086DTTRY
1.5A LOW DROP ADJUSTABLE POSITIVE VOLTAGE REGULATOR
کیفیت: ORIGINAL(distributor) پکیج: TO-252-3
قیمت تک فروشی 1,804,464 ریال
قیمت عمده 1,718,938 ریال (10 به بالا)
قیمت ویژه 1,684,727 ریال (100 به بالا)
قیمت فوق العاده1,667,621 ریال (1000 به بالا)
![SKYTECH](bootstrap/img/Icon/tether.png) قیمت تک فروشی 2.024 تتر با تخفیف
11.5911.0410.8210.71
|
|
حداقل دماي کاري |
-40 سانتيگراد |
|
حداکثر دماي کاري |
125 سانتيگراد |
|
|
|
شرکت توليد کننده |
STMicroelectronics |
|
توضیحات
LD1086 يک تنظيم کننده ولتاژ افت پايين است که قادر است تا 1.5 آمپر جريان خروجي را ارائه دهد. خروج خروجي در حداکثر 1.2 ولت در حداکثر جريان خروجي تضمين مي شود و در بارهاي کمتر کاهش مي يابد. LD1086 پين به پين با رگولاتورهاي قابل تنظيم 3 ترمينال قديمي سازگار است، اما از نظر افت و تحمل خروجي عملکرد بهتري دارد. برخلاف رگولاتورهاي PNP که بخشي از جريان خروجي به عنوان جريان ساکن هدر ميرود، جريان ساکن LD1086 وارد بار ميشود و راندمان را افزايش ميدهد. اين دستگاه در بسته بندي TO-220، D²PAK، D²PAK/A، DPAK يا DFN8 (4x4) موجود است. برش روي تراشه به رگولاتور اجازه مي دهد تا به يک تحمل ولتاژ خروجي بسيار محدود برسد. LD1086 به عنوان درجه خودرو براي ولتاژهاي خروجي قابل تنظيم در بسته هاي TO-220 و DPAK موجود است. تست هاي آماري PAT، SYL، SBL انجام شده است و دستگاه ها مطابق با مشخصات AEC-Q100 براي بازار خودرو در محدوده دمايي -40 درجه سانتي گراد تا 125 درجه سانتي گراد واجد شرايط هستند.
Description
The LD1086 is a low drop voltage regulator capable of providing up to 1.5 A of output current. Dropout is guaranteed at a maximum of 1.2 V at the maximum output current, decreasing at lower loads. The LD1086 is pin-to-pin compatible with older 3-terminal adjustable regulators, but has better performance in terms of drop and output tolerance. Unlike PNP regulators, where a part of the output current is wasted as quiescent current, the LD1086 quiescent current flows into the load, increasing efficiency. Only a 10 µF (minimum) capacitor is needed for stability. The device is available in a TO-220, D²PAK, D²PAK/A, DPAK or DFN8 (4x4) package. On-chip trimming allows the regulator to reach a very tight output voltage tolerance; within ± 1% at 25 °C. The LD1086 is available as automotive grade for adjustable output voltages in the TO-220 and DPAK packages. The PAT, SYL, SBL statistical tests have been performed, and the devices are qualified according to the AEC-Q100 specification for the automotive market in the temperature range of - 40 °C to 125 °C.
|
کلیه حقوق این سایت متعلق به فروشگاه Skytech می باشد