توضیحات
جهت راه اندازي موتورهاي پله اي از اين درايور استفاده مي شود . اين درايور مبتني بر آيسي TB6600 متعلق به توشيبا ساخته شده است. و قابليت راه اندازي استپ موتور ها در مد ميکرو استپ را دارد. در درايو ميکرو استپ تعيين زاويه ي هر گام مقدور مي باشد.
ويژگي ها:
ولتاژ تغذيه:9 تا 42 ولت DC
حداکثر جريان خروجي: 5 آمپر
راه اندازي موتورهاي 2 فاز و 4 فاز
ايزولاسيون نوري براي ورودي هاي سيگنال
داراي حفاظت هاي حرارتي و اضافه جريان
کاربرد:
راه اندازي استپ موتورهاي 2 فاز يا 4 فاز در صنايع ، دستگاه هاي CNC و ...
Description
Stepper Motor Driver, MYSWEETY TB6600 0.2-5A Nema 17/23 CNC Controller Stepper Motor Driver 1 Axis 2 Phase Hybrid Stepper Motor
Description
HY-DIV268N-5A is is a PWM chopper-type single-chip bipolar sinusoidal micro-step stepping motor driver. 2-phase bipolar-type stepping motor can be driven by only clock signal with low vibration and high efficiency. Suitable for drive Two-phase stepping motor dynamic voltage 12V to 48V, the maximum drive current is less than 5A and having outer diameter of 35 to 86 mm.
This drive uses the current loop subdivision control, the motor torque ripple is very small, low-speed running is very smooth. High-speed torque is much higher than other two-phase drives, high positioning accuracy. Widely used in the engraving machines, CNC machine tools, packaging machinery and other high resolution requirements on the device. NEMA17, NEMA23, NEMA24 and NEMA34 stepper motors work perfectly with this HY-DIV268N-5A Stepper Driver.
Features
PWM constant current drive single-chip bipolar sinusoidal micro-step stepping motor driver
Selectable excitation mode (1/1, 1/2, 1/4, 1/8, and 1/16 step)
Single power supply
Average current control (in 8 steps from 0.2A to 5A), two-phase sinusoidal current drive output
DC 12 ~ 42V Single power supply operation
Optically isolated inputs
Over voltage, under-voltage, over-current, and short-circuit protection
High starting speed
High-speed torque
Black Rugged Plastic Enclosure and Large Black Aluminium Heat Sink
Mounting Holes on Heat Sink for Mounting the Drive in Machine Panels
Technical Specifications
Input voltage DC 8 ~ 50V input (Operating Voltage: 12V – 42V)
The input current of 1 to 5 amps
Output current:
IOUT= 5.0 A (absolute maximum ratings, peak, within 100ms)
IOUT= 4.5 A (operating range, maximal value)
Operating Temperature: -10 to 45 ?
Storage temperature: -40 ? to 70 ?
|